Set Up Branches and Punch Methods
Admin steps to register branches (locations) and enable the punch methods used at each.
【Register branches】
- 1.Go to Admin menu → Branch Settings.
- 2.Use "Add Branch" to enter the office name, address, etc. Create one per location if you have several.
【Enable punch methods】
- 1.Select a branch and open the "Punch Methods" tab.
- 2.Turn on the methods you'll use (QR code, IC card, face recognition, etc.).
- 3.For QR code punch, issue the kiosk QR/URL and set it up on a reception device (see #ATT-006). IC cards require a compatible reader and card registration (see #ATT-007).
【About add-ons】
QR, IC, and face-recognition methods require the corresponding add-on and appear locked if not subscribed. The Normal Punch (button) needs no add-on and is always enabled (it cannot be turned off — see #ATT-027).
【Inform employees】
When you change punch methods, let employees know how to use them (#GUIDE-010 is the employee-facing punch guide).
Example
Branch Settings → add branch → enable methods → set up QR/kiosk → inform employees.
branch settingspunch methodslocationofficeQR codeenable punchadmin
Was this article helpful?