按分店设置自助机和本人仪表板打卡按钮的方法。
【打卡按钮模式说明】
可按门店(分店)分别设置 punch.workvell.com（自助机）和本人仪表板的打卡按钮显示与行为。在"分店设置 > 打卡按钮"中配置。
【三种按钮模式】
・智能：一次打卡由系统自动判定上班/下班/休息（默认）
・分离：明确选择上班·下班·休息开始·休息结束·外出·返回·直接回家·直接到场
・折叠：默认智能单按钮，展开"其他操作"显示明确按钮
【外出·直接回家·直接到场】
・外出：工作中临时外出（返回后继续）。作为休息(从工时扣除)或工时，按分店设置选择
・直接回家：从客户处直接回家（记为下班）
・直接到场：直接到客户处（记为上班）
【其他设置】
时间显示(24/12小时)、外出/直接回家的事由备注(无/任意/必填)、自拍(打卡时拍摄面部照片)。
【本人仪表板】
本人仪表板的打卡按钮遵循该员工"所属分店"的设置。未设置所属分店时默认为智能。
這篇文章對您有幫助嗎？
Setting up and using the punch-in kiosk (shared terminal)
How to set up a shared punch-in kiosk terminal for employees without individual devices.
Clock-In for External Work and Off-Site Assignments
How field workers and off-site employees clock in for attendance.
Attendance Recording for Direct-to-Customer and Direct-Home-from-Customer Trips
How to record attendance for employees who go directly to clients or home without passing through the office.
Time Correction Request
When a clock-in or clock-out is missed or incorrect, submit a correction request for manager approval.
Overtime Request Process
WorkVell recommends pre-approving overtime. Unapproved overtime triggers an alert for managers.
QR Code Punch Kiosk
How to clock in and out using the QR code kiosk on a tablet or smartphone.
IC Card Punch Setup
Register Suica, PASMO, or any NFC card as an employee badge for tap-to-punch clock-in.
IC Card Punch Setup
Register Suica, PASMO, or any NFC card as an employee badge for tap-to-punch clock-in.
How to Request Clock-In Time Correction
How employees request corrections to incorrect or missed clock-in records.
Preventing Missed Punches (Alerts and Reminders)
Configure automatic reminders for employees who forget to clock in/out, and monitor real-time attendance status.
出现"检测到重复打卡"错误时
在上次打卡后60秒内再次打卡时，会显示"检测到重复打卡"。本文说明原因与解决方法。
Face Recognition Punch
Clock in and out with facial recognition — no card or device needed.
Time Correction Request
When a clock-in or clock-out is missed or incorrect, submit a correction request for manager approval.
